Name: NVT NV-214A-M Single Channel Passive Video Transceiver
Brand: NVT Phybridge
SKU: NV-214A-M

NVT NV-214A-M Single Channel Passive Video Transceiver

Brand: NVT Phybridge

ADI #:NV-214A-M Model #: NV-214A-M Name: NVT NV-214A-M Single Channel Passive Video Transceiver

Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)

NVT Phybridge NV-214A-M Single Channel Passive Video Transceiver

Product Overview

General Information

The NVT Model NV-214A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

This product is an improvement over NVT's popular NV-213A video transceiver. The passive NV-214A-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras and a greater number of mounting options in general at both ends of the system. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft. The NV-214A-M Video Transceiver also incorporates new improved transient protection that eliminates the need for a ground screw.

The unparalleled interference rejection and low emissions of the NV-214A-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-214A-M carries a limited lifetime warranty and is UL and cUL listed.

Main Features

Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)
Mini-coax pigtail supports in-camera mounting in most dome cameras
No power required
Exceptional interference rejection
Built-in transient protection
Male BNC on the NV-214A-M allows connection directly to the camera/DVR
Limited lifetime warranty

Main Features

Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)

Information

Category : Baluns, Video Surveillance, Accessories, Products