Sounder -Ve & Sounder +Ve can be connected at the host panel or any convenient point on a sounder circuit (DO NOT SPUR). 24 VDC and 0V can be derived from the host panel or, alternatively, from an external PSU.
If connecting the FF502P to a C-TEC fire panel only three input control wires are required (Sounder -Ve is not required as our conventional panels have a common 0V rail).
Fits on standard UK 25mm flush or surface mount back boxes.
Universal four zone sounder circuit extender kit
UPC Code : 5056059604152
ADI Part Number
4 Zone Sounder Circuit Extender Kit
Flush Mount, Surface Mount
Light Grey, White
Supply/operating voltage: 15-30 VDC
Quiescent current Less than: 5mA @ 27 VDC (includes monitoring current)
No. of conventional sounder circuits: 4
EOL resistor value: 4 x 6K8 0.25W for sounder circuits A, B, C and D
Max. sounder output current: 400mA max. current per circuit. Total output current to be no greater than 1A.
IP Rating: IP40.
Operating conditions/temperature: -10ºC to +60ºC.
Notes: A/B and C/D Trigger Inputs pull down to 0V.