Patient Stations
Filter Results
More Ways to Shop
Showing1 - 12 of 56
content loaded
ADI#: QT609RSModel#: QT609RS
Sign in for your Pricing
ADI#: QT602Model#: QT602
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC809DBBTModel#: NC809DBBT
Sign in for your Pricing
ADI#: NC802DBModel#: NC802DB
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT422RXModel#: QT422RX
Sign in for your Pricing
ADI#: QT602RSModel#: QT602RS
Sign in for your Pricing
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC803M/10Model#: NC803M/10
Sign in for your Pricing
ADI#: QT609RS
Model#: QT609RS
ADI#: QT609RSModel#: QT609RS
Key Features
- A programmable Quantec addressable call point c/w infrared receiver and call follower sounder.
- Includes a Call button, Reset button and red/green confidence light
- Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT602
Model#: QT602
ADI#: QT602Model#: QT602
Key Features
- A programmable addressable call point c/w remote jack socket for use with C-TEC's Quantec Addressable Call System.
- Includes a Call button, Reset button and red/green confidence light.
- Can make up to 5 levels of call - Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT609
Model#: QT609
Key Features
- A programmable Quantec addressable call point.
- Includes a Call button, Reset button and red/green confidence light.
- Can make up to 5 levels of call - Standard, Ensuite, Help Required, Emergency, Presence & Attendance (dependent on configuration and ancillary devices used). Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC809DBBT
Model#: NC809DBBT
ADI#: NC809DBBTModel#: NC809DBBT
Key Features
- A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems.
- Allows calls generated by an NC807C ceiling pull unit to be cancelled at source, i.e. inside the WC.
- On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure users that help is on the way (calls are acknowledged/accepted at an NC943B Single Zone Call Controller or an NC910/20 Range 10 to 20 Zone Call Controller).
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC802DB
Model#: NC802DB
ADI#: NC802DBModel#: NC802DB
Key Features
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
Sign in for your Pricing
Sign in for your Pricing
ADI#: L622
Model#: L622
Key Features
- The ‘call follower’ sounder which is activated when the call point is in ‘staff present’ mode, alerts staff to other calls on the system.
- The jack socket will accept any closing contact input from pear leads, pressure mats, radio triggers and a host of other triggering devices.
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT602D
Model#: QT602D
Key Features
- For use with master call points (maximum of three per master)
- 12 months warranty
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT422RX
Model#: QT422RX
ADI#: QT422RXModel#: QT422RX
Key Features
- Designed for use with Quantec's QT412 & QT432 range of infrared/radio transmitters and pendants.
- Operates at radio frequency (RF) 868.3 MHz
- Allows standard, help required, emergency and/or attack calls to be generated from external areas such as car parks, loading bays, etc.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT602RS
Model#: QT602RS
ADI#: QT602RSModel#: QT602RS
Key Features
- A programmable Quantec addressable call point c/w infrared receiver, call follower sounder and remote jack socket.
- Includes a Call button, Reset button and red/green confidence light.
- Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters.
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT603
Model#: QT603
Key Features
- An essential wiring/installation aid for C-TEC's Quantec Addressable Call System.
- Helps protect against open and short circuit faults and reduces the risk of volt drop.
- Includes one input and one output connection for Quantec's'Spine' wiring (typically 1.5-2.5mm T&E) and six fused 400mA'limb' connections for the wiring of individual circuits containing Quantec's field devices (typically 4 core stranded security cable).
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC804DE
Model#: NC804DE
Key Features
- A button-operated call/reset point capable of generating Emergency calls on an 800 Series Call System.
- Onboard reset button cancels Emergency calls made from the NC804DE and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Ideal for use as a reset point for ceiling pull units that will allow a more urgent Emergency call to be made if additional assistance is required.
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC803M/10
Model#: NC803M/10
ADI#: NC803M/10Model#: NC803M/10
Key Features
- Magnetic reset keys
- For use with all magnetic call points, monitoring points and reset points
- Pack of 10
Sign in for your Pricing
Sign in for your Pricing